2017 NEW HOLLAND DURABINE 419

2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com
2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com
2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com
2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com
2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com
2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com
2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com
2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com2017 NEW HOLLAND DURABINE 419 at www.schrefflerequip.com
All
Photos
Videos

For Sale Price:Call

Description

MORE HIGH-PERFORMANCE HEADERS
Powerful Speedrower® SP Windrowers allow you to drive a wide variety of high-performance headers. Choose from two powerful disc headers—the Durabine™ 416 with a 16’ 1” cut, or the Durabine™ 419 with an industry-widest 19’ 4” cut. New Holland offers a large selection of draper headers—from 25 to 40 feet wide. Haybine® sicklebar headers have a legendary history of top cutting and conditioning performance, and are available with a 14, 16 or 18foot cut.

QUICKMAX™ KNIFE SYSTEM IS STANDARD EQUIPMENT
Do not put off changing dull or broken knives anymore; the MowMax II disc cutterbar is now equipped with the QuickMax™ system as standard equipment so you can replace worn or damaged knives in a flash so you’re back cutting clean again in just seconds. The unique QuickMax system allows for fast knife changes with a 180-degree rotation of the discs so you are back mowing quickly. The patented New Holland eccentric knife nut utilizes centrifugal force to provide exceptional blade security. Best of all the QuickMax knife system works with all Durabine™ disc header knives so there are no special knives to buy. See your local authorized New Holland dealer about the QuickMax system and ask about special upgrade kit available for prior model Durabine™ disc headers.

THE BENEFIT OF LARGER DISCS AND KNIFE OPTIONS
Durabine heads provide a close, clean cut with less horsepower, which improves mowing efficiency and reduces fuel consumption. The large-diameter cutting discs operate at a shallower angle that easily slices through down crop and reduces the risk of scalloping. The MowMax II cutterbar delivers a close cut—as short as 0.79 inch—as well as a wider range of cutting heights—up to 3.5 inches with standard skid shoes. Reversible, swing-away, 18-degree twist knives are standard. A broad, offering of knives includes standard 14-degree twist knives, 7-degree twist knives, special-design rock knives, and 14-degree twist, serrated knives. For extended knife wear in difficult conditions, the rock knife offers greater resistance bending, and are ideal when operating in extremely stony conditions. Special serrated knives are ideally suited for sandy soils or abrasive operating conditions, providing long life in these harsh working environments. All New Holland knives for Durabine™ disc heads are reversible for double the cutting life and work with the QuickMax system.

SMOOTH AND EVEN CROP FLOW
Durabine disc heads feature the exclusive, full-length crop-flow auger that quickly moves crop away from the cutterbar for cleaner cutting, increased capacity, optimum feeding, more uniform conditioning quality, and an evenly distributed windrow. The heavy-duty, 20-inch auger features thick 5/16-inch flighting with reinforcement gussets on the backside to handle the heaviest crops with ease.

VERSATILE, MODULAR CONDITIONING SYSTEM
Non-conditioned hay? No problem. Just remove the conditioning module and outfit the header with a closure kit, or exchange one system for another system for the flexibility to condition different crop types. Removing or exchanging the conditioning module takes just minutes so you can easily achieve ideal conditioning.
Available Options:
• Rubber chevron-design intermeshing rolls
• Steel Chevron Rolls
• High-Contact Urethane Rolls
• LeaningEdge™ Flail Tine Conditioning
The proven New Holland torsion-bar roll-pressure system applies near-constant pressure for consistent conditioning, no matter how thick the crop, without plugging.

QUICK AND EASY ADJUSTMENTS
Crop widths can range as wide as a 96-inch swath or as narrow as a 38-inch windrow—or any width in between. No tools are required to make width adjustments, and with the optional electric windrow shield adjustment feature, changes can be made without leaving the cab. New Holland makes adjusting roll pressure easy, too. A simple hand crank adjusts conditioning aggressiveness. Likewise, roll gap adjustment is simple and precise. One easy adjustment at each end of the upper roll completes the job in no time!

HYDRAULIC HEAD TILT
To make a cut-height adjustment, simply use the tilt switch on the CommandGrip™ multi-function handle. With a glance through the front windshield, you can quickly observe the head tilt angle indicator located on the header tilt cylinder on the Speedrower windrower. This quick check allows you to choose the best cutting angle for every field situation.

HIGH-CAPACITY DURASWATH™ DRAPER HEADS
For high-capacity swathing of small grains, canola, forage and specialty crops, choose DuraSwath™ draper heads from New Holland. Available in 25, 30, 36 and 40-foot widths, DuraSwath headers cut big acreage down to size.

Weight: 5,340

Header Drive

Cutting width ft. in. (m)
19’ 4” (5.9)
Overall width ft. in. (m)
19' 5" (5912)
Approximate weight lbs. (kg)
5340 (2422)
Versions available: Single-knife drive, single swath, single reel
-
Versions available: Single-knife drive, double swath, single reel
-
Versions available: Double-knife drive, single swath, single reel
-
Versions available: Double-knife drive, single swath, split reel
-
Versions available: Double-knife drive, double swath, single reel
-
Versions available: Double-knife drive, double swath, split reel
-
Windrow/swath width in. (mm)
38 to 96 (965 to 2438)

Cutterbar

Cutterbar type
12-disc modular disc cutterbar, 2500-rpm max disc speed
Knives
24 reversible, swing-away knives (2 per disc)
Knife speed
181-mph(291-kph) knife tip speed
Sickle stroke in. (mm)
-
Flotation
Hydraulic adjustment from windrower cab
Cutting angle and height, degrees, in (m)
Standard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 (18 to 89) with standard skid shoes*
Header ground clearance - bottom of skid shoes in. (mm)
29.6 (754)**

Reel

Reel Choices (SF = steel fingers, PF = plastic fingers)
-
Speed range rpm
-
Drive
-

Raptor Draper Belts

Belt width and construction
-
Belt/roller guide design
-
Roller design
-
Speed range ft. (m)
-
Cleat design and height in. (mm)
-
Chaff barrier seal design
-
Belt angle degrees (@minimum cutterbar tilt)
-

Auger

Type
Floating
Maximum diameter in. (mm)
20 (508)
Flighting depth in. (mm)
7 (178)

Conditioner (Rolls)

Type
Chevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m)
102 (2.6)
Roll speed rpm
938
Roll pressure
Torsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gap
Adjustable stop bolt

Conditioner (Flails)

Length in. (m)
-
Speed rpm
-
Hood position
-
Site Hosted By...TractorHouse.com®
© Copyright by Sandhills Publishing Company 2017. All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission. TractorHouse.com is a registered trademark of Sandhills Publishing Company.

Copyright & Legal Notice   |   Privacy Policy