2017 NEW HOLLAND 316

2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
2017 NEW HOLLAND 316 at www.schrefflerequip.com2017 NEW HOLLAND 316 at www.schrefflerequip.com
All
Photos
Videos

For Sale Price:Call

Description

PEACE OF MIND DIRECT FROM THE FACTORY
When you buy any new Discbine® disc mower-conditioner equipped with a MowMax™ or MowMax™ II disc cutterbar, you’re covered with one full year of base factory warranty, plus two additional years of disc cutterbar coverage. Cut confidently. Cut with New Holland.

THE DEFINITION OF DISC MOWER-CONDITIONERS
Even in tough conditions, a genuine Discbine disc mower-conditioner swiftly turns heavy crop into fast-drying windrows or swaths. An extensive model lineup provides you with numerous reliable choices. From the economical seven-disc models with a modest, nine-foot cut up to the highly productive 10-disc models that quickly knock down sixteen-foot with every pass, there’s a model that’s suitable for your acreage and operation.

A CUT ABOVE THE REST: MOWMAX™ AND MOWMAX™ II CUTTERBARS
H7000 Series models cutting up to 10’ 4” inches feature the proven reliability and performance of the classic MowMax disc cutterbar. For the greatest capacity, Discbine® Series 313 and 316 center-pivot models feature the MowMax II disc cutterbar, a cutterbar designed for the higher demands of large harvesting operations. It incorporates the large discs and heavy-duty components also found on Durabine™ disc heads for New Holland Speedrower® self-propelled windrowers.

CONDITIONING SYSTEMS FOR FAST DRYING
You’ll harvest crops quickly and produce nutritious, high-value feed with your choice of three conditioning systems. Choose the gentle conditioning of rubber chevron-intermeshing rolls that save delicate leaves, steel chevron rolls for winter forage or long-stem and cane grasses, or LeaningEdge™ flails for fast drying of grass hay.

FAST AND SIMPLE IN-FIELD SERVICABILITY
MowMax and MowMax II cutterbars feature a true modular design for smooth, quiet, trouble-free mowing as well as fast and inexpensive servicing. Driven through individually sealed gearboxes with dedicated oil reservoirs, modules are never at risk for oil starvation while cutting on hillsides. In the event that your mower hits an obstruction, the exclusive New Holland ShockPRO™ hubs absorb harmful impacts, protecting the cutterbar drive from damage. Even better, they’re quick to replace in the field so you can keep cutting when the weather is right. Accidents happen and in the event of a significant collision, the true modular MowMax concept fully contains damage to the effected module to minimize damage to the rest of the cutterbar. How? Break a knife? MowMax II cutterbars now feature optional QuickMax™ knives that provide you with the ability to change out knives in a matter of seconds.

CHEVRON INTERMESHING RUBBER ROLLS
Gentle chevron rubber intermeshing rolls provide full-stem crimping and cracking with a scrubbing action while handling the leaves of high-value feeds delicately, making it the ultimate solution for alfalfa and clover. This is possible because of the large 10.4-inch roll diameter, the rubber compound, the intermeshing fit and profile of the lugs. These features work together to grip the crop and generate an even flow of crop through the rolls to provide an even spread into fast drying swaths or windrows.

CHEVRON INTERMESHING STEEL ROLLS
Durable chevron steel intermeshing rolls are designed for use with all crops, but show a real advantage in cane-type crops, grain forage crops and extra-tall grass crops. The chevron pattern of the steel lugs provides aggressive full-stem crimping, smooth crop flow, and even distribution into fast drying swaths or windrows. Rugged all-steel roll construction resists wear better than rubber, providing a long life even in highly abrasive conditions.

TORSION-BAR ROLL PRESSURE
Year after year, New Holland’s torsion-bar roll-pressure system is proven to be the most effective design for delivering consistent, thorough conditioning. The no-tools-required hand crank makes it easy to tailor roll pressure to the crop without crawling under the machine with wrenches. The unique, over-center linkage momentarily relieves roll pressure, allowing crop slugs or foreign objects to pass without plugging for non-stop mowing.

New Holland- Disc Cutterbar

Type
MowMax™ II True Modular Disc Cutterbar
Width of Cut, ft. in. (m)
16' 3'' (4.95)
Number of discs
10
Number of knives
20 (2 per disc)
Disc Speed, rpm
2,250
Cutting angle
2 to 10 degrees
Hydraulic Cutting angle control
Standard
Standard Cutting height skid shoe, in. (mm)
Standard 0.79-2.07 (20-69)
Fixed Raised, high-stubble skid shoe
Optional .79-5.75 (20- 146)
Adjustable Raised, high-stubble skid shoe
Optional 3-5.5 (76 - 140)
BioMass skid shoe
Optional 5-7.75 (127- 197)
Ground clearance with header fully raised, in. (mm)
16.2" (411)
Cutterbar Flotation
Vertical and lateral, adjustable springs
QuickMax™ Knife Change System
Optional
ShockPro™ Disc Drive Hub protection system
Standard
MowMax™ 3-year cutterbar protection plan
Standard

Chevron-Design Roll Conditioner

Chevron-Design Roll Conditioner
Optional
Type
Choice of molded rubber or steel rolls
Roll Length, in. (mm)
125 (3175)
Roll Diameter, in. (mm)
10.4 (264)
Roll Drive
4 HB V-belt and enclosed gears
Roll Speed, rpm
Two-Speed: 750 or 640
Roll Pressure System
Torsion Bar
Conditioner Intensity Adjustment
Single crank adjustable roll pressure and two stop bolts to adjust roll gap

LeaningEdge Flail Conditioner

LeaningEdge™ Flail Conditioner
Optional
Number of LeaningEdge flails
120
Semi-Swinging LeaningEdge flail design
Standard
Rotor Diameter, in. (mm)
22 (560)
Standard Speed, rpm
1042
Optional Slow Speed, rpm
752
Drive
4 HB V-belt
Conditioner Intensity Adjustment.
Single crank adjustable rotor hood
Optional Textured Hood Liner Kit
Optional

Attachment

Standard Drawbar
-
Drawbar Swivel Hitch
Optional
2-pt Swivel Hitch
Optional

Dimensions

Height, Transport, ft. in. (m)
7' 5" (2.26)
Height, Operating, ft. in. (m)
6' 7" (2.01)
Width, Transport, ft. in. (m)
16' 7" (5.05)
Width, Operating, Std. Drawbar Hitch, ft. in. (m)
-
Width, Operating 2-pt Swivel Hitch, ft. in. (m)
25' 7" (7.8)
Width, Operating Drawbar Swivel Hitch, ft. in. (m)
19' 7'' (6.0)
Length, Transport, Standard Drawbar Hitch, ft. in. (m)
-
Length, Transport, 2-pt Swivel Hitch, ft. in. (m)
32' 0'' (9.7)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m)
31' 0'' (9.4)
Length, Operating, Standard Drawbar Hitch, ft. in. (m)
-
Length, Operating, 2-pt Swivel Hitch, ft. in. (m)
26' 7'' (8.1)
Length, Operating Drawbar Swivel Hitch, ft. in. (m)
25' 7'' (7.8)
Weight, Operating lbs. (kg)
6,700 (3039)

Drive

Drive
1000 rpm PTO, enclosed gears and four HB belt

Drive Protection

Drive Protection
Slip clutch and over-running clutch

Hydraulics

Hydraulic swing
Standard (double-acting cylinder)
Operating Position
Center-Pivot, Right or Left Side
Hydraulic lift
Standard (operated by two single-acting cylinders; master/slave)
Hydraulic tilt
Standard (operated by single-acting cylinder and incorporated into the lift system)

Material Discharge

Swath, ft. (mm)
10 (3000)
Windrow, ft. (mm)
Adjustable from 3 to 8 (914 to 2400)
Wide Thin Fin Kit (100 % Coverage)
-

Speeds

Operating, mph (kph)
0 to 9 (0 to 14.5)
Transport, mph (kph)
20 (32)

Tractor Requirement

Tractor Requirement
100 PTO hp (75 kW) or greater with standard ASAE Category III drawbar.
Hydraulic valves
All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights

Tubeless Ag Rib Implement Tires

Size
12.5L x 15 8PR
Site Hosted By...TractorHouse.com®
© Copyright by Sandhills Publishing Company 2017. All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission. TractorHouse.com is a registered trademark of Sandhills Publishing Company.

Copyright & Legal Notice   |   Privacy Policy